EKO INSTRUMENTS CO., LTD. Sunshine Duration Meter MS-093 Instruction Manual Ver.4
Pg. 5
3. Safety
Information
EKO Products are designed and manufactured with consideration for safety; however, please make
sure to read and understand this instruction manual thoroughly to be able to operate the instrument
safely in the correct manner.
WARNING
CAUTION
Attention to user; pay attention to the instructions given on the
instruction manual with this sign.
3-1. WARNING/CAUTION
1. Setup and Handling
Fasten this product securely on a stage with bolts and nuts to prevent from falling due to strong
wind, earth quake and so on and causing unexpected accidents.
Do not give an impact on exposed glass tube.
Do not hold the glass tube part when carrying. Glass tube part may break and lead to
serious injury and/or accident by broken glass and/or dropping the electrical circuit part.
If any impact is given, the glass may break. Broken glass pieces may cause injury and/or
accidents.
Do not place fingers or any objects into operating blower fan, or unexpected accident may occur.
2. Grounding
After newly setting up or moving the instrument to different measurement site, make sure to connect the
grounding cable. When grounding cable is not properly connected, it may cause electrical shocks and/or
leakage.
3. Power Supply
Make sure to check the power source voltage of the product, and the power supply voltage type (AC or DC)
match before turning on the power of this product.
