Findclouds Manual 19
This screenshot shows the
adjusted image. It's not
perfect circular. There is a
buckle on the bottom left
side, caused by the rays of
light from the sun on bottom
left side. By comparison to an
under-exposed image or
another position of the sun
one will find out, that the
buckle will vanish or change
position. Another possibility
for better adjustment is
enlarging the dialog by
"maximise" button or pulling the edges.
[Center]
will switch back to adjustment of offset angle and deactivate accentuated contrast. It
allows to centre up the image and adjust size of fisheye area.
[Zenith]
equalises the image and allows to adjust field of view.
2.7.2 Calibration of angle offset
This is the configuration window, when an image was loaded, and only the basic values had been
changed. Now it is possible to change the offset angle of the Cloudcam and buttons for further
