EKKO EK18A, Руководство по обслуживанию

Страница: 3 / 41

1
1 Regular maintenance
Only qualified and trained personnel should perform maintenance work on this vehicle.
Before maintenance, remove the cargo from the fork and lower the fork to the lowest position.
If you need to lift the vehicle, use the specified lashing or jacking equipment.Before operation, place safety
devices (such as designated jacks, wedges or wood blocks) under the vehicle to prevent accidental drop,
movement or sliding.
Use the original parts approved and released by your dealer.
Please consider that hydraulic fluid leakage may lead to machine failure and accidents.
Pressure valve adjustment is only allowed by trained service technician.
If you need to replace wheels, casters must be round and free of abnormal wear.
Check the items on the maintenance list.
1.1 Maintenance List
Interval
(month)
1 3 6 12
The hydraulic system
1.1
Check the function of hydraulic system
•
1.2
Check hoses, piping and joints for tightness, sealing and damage
•
1.3
Inspect cylinder block and piston for damage, sealing and fixation
•
1.4
Visually inspect the door stand roller and inspect the roller surface for wear
•
1.5
Inspect forks and loading parts for wear and loss
•
1.6
Check load chain Settings and re-tensioning if necessary
•
1.7
Check oil level in fuel tank
•
1.8
Replacement hydraulic fluid
•
Mechanical systems
2.1
Check the fork for deformation and breakage
•
2.2
Check chassis for deformation and cracking
•
2.3
Check that all screws are in place
•
2.4
Check gear box for noise and leakage
•
2.5
Check wheel for deformation and damage
•
2.6
Lubricated steering bearing
•
2.7
Check and lubricate the pivot points
•
2.8
Lubricating grease nozzle
•
Electrical system
3.1 Check whether power cables are damaged
•