7
pins, the brake pads will move to the rotation direction of brake drum. The
friction between brake drum and friction plate is then increased.
Double brake pads are mounted on both sides of the drive axle. Brake consists of
two groups of brake pads, brake cylinder and regulator. One end of the brake pad
is in contact with the fixed pin, and the other end is in contact with the adjusting
calipers. The returning spring and compression spring rod suppress the parking
brake lever unit. In addition, the brake is also assembled with a parking brake
mechanism and automatic adjustment device.
Brake
1. Left baseboard 2. Brake shoe 3. Brake cylinder 4.adjustable Spring
5.return spring 6. Hand brake adjusting mechanism 7.hand brake return
spring 8.spring tab letting 9.pressure lever 10.tension spring 11.pull
rod stop block 12.Jaw dust cover
The parking brake should always be used for parking, to prevent accidents
caused by slippage and secure the forklift. Also equipped with a limit switch on
the parking brake, the control circuit is closed under a parking state. The parking
brake must be released before starting to drive, only after that the control circuit
can be switched on. The parking brake has adjustable elastic functions.
2.2.4 Operating system
