EKKO EB18E, Спецификация

Страница: 14 / 26

13
8.operating instruction
Before operation, please be familiar with the function of each switch/button on the instrument panel.
8.1 Start, run and parking:
1).Insert the key into the key switch, turn to the right, pull the emergency power safety switch up, open the control
circuit.
2).Forks rise above ground about 10 cm
3).Turn on the travel switch slowly, till the requested speed
4).Any fault of the truck happening during operation, need to cut off the power immediately, and press the red
emergency power switch down.
5).Avoid to take a sudden turn during driving the truck.
6).Using stacker full load climbing a slope, need to know the condition of the slope, and press the travel switch as
much as possible to get a maximum grade ability.
7).When stop driving, put the fork in the bottom, press the emergency switch down, and pull out the key.
8.2The usage of emergency safety switch
Press the emergency safety switch down, then the truck is powered off. Method to open it: pull the red button up.
Emergency safety switch is made of plastic, too much pressure may damage it.
8.3 The usage of horn button.
Press the horn button in the center of handle to notify people around.
8.4 Battery capacity indicator
The stacker battery capacity indicator has electricity capacity display function.