Bluetooth specification:
Supports V4.1+ EDR with Handsfree Profile 1.5, Headset Profile 1.1 and A2DP
profile 1.2 (Class ll) and Audio/Video Remote Control Profile AVRP
Battery: 350mAh
Standby time (unpaired):
up to 90 days (with fully charged battery)
Talk time:
up to 16 hours (with fully charged battery)
Music Playing time:
up to 12 hours (with fully charged battery)
Operating Distance:
up to 10 meters / approximately 33 feet
Certifications:
CE, FCC, RoHS, BQB
1. Connect the micro USB plug on the charging cable to the micro USB port on the headphone.
2. Connect the standard USB plug on the charging cable to any standard USB power port such as
found on a notebook computer, or the charging adapter for an iPod, iPhone, etc.
The Power/Charging/Pairing indicator will glow RED while the headphone is charging. The indicator will
turn off when the battery is fully charged.
Reminder: Allow the battery to charge fully before first time use. Normal recharge time should take
about 2.5 hours. When fully charged the battery provides up to 16 hours of working time, or 90 days of
standby time.
Because your B90 headphones use Bluetooth version 4.1 the battery level indicator of the headphones
may also appear on your iPhone home screen, usually adjacent to the phone’s own battery level
indicator, if your specific phone supports this display function.
3. Multi-Function Button (MFB)
Pressing the Multi-function button (MFB) turns the headphones “On”, initiates pairing, answers/ends
phone calls, controls Play/Pause function and turns the headphones “Off’.
4. Switching the Power On and Off
1. Press and hold the Multi-function button for approximately 3 seconds. The voice prompt will say
“Power On” and the LED indicator turns BLUE and flashes two times per second. If the headphones
have not been previously paired to a Bluetooth device, the headphones will enter auto-pairing mode.
2. When the power is “On” press and hold the Multi-function button for approximately 3 seconds. The
voice prompt will say “Power Off”. The LED indicator remains on briefly and then shuts off. This
indicates that the power is “Off”.
Introduction
Specifications
1. Controls and Indicators
2. Charging Your Headphones
Getting Started
Your new Bluetooth stereo headphones are designed to link with your Bluetooth enabled smartphone
or music player to allow you to wirelessly listen to music and answer phone calls within the normal
10 meter (33 feet) Bluetooth operating range.
What’s Included
2
3
5
6
7
1
8
9
4
Computer USB port
USB Adaptor
(not included)
1. Multi-function button: Power On/Off,
Answer/End, Pair and Play/Pause.
2. Power/Pairing/Charging LED Indicator
3. Volume Up (+) Button
4. Skip Track Forward Button ( )
5. Volume Down Button ( - )
6. Skip Track Reverse Button ( )
7. Microphone
8. Micro USB Charging Port
9. Auxiliary Input Jack
Right side
Left side
• USB
Charging Cable
• Bluetooth Stereo Headphones
IMPORTANT: Your headphones operate on a built-in rechargeable lithium-ion battery. Although the
battery was fully charged when it left our factory, like all rechargeable batteries it can begin to
discharge during periods of non-use. We recommend that you charge the battery for at least 2.5
hours before first time use.
OR
Computer connected
to working outlet
Model:
B90
HEADPHONES
MIC
Controller button
Microphone
• Detachable Audio Cable
9. Auxiliary Input Jack
•
It is dangerous and illegal (in some jurisdictions) to use headphones when you are driving a car, riding a
bike or motorcycle, or operating a watercraft. Be aware of local laws and regulations.
•
Do not use these headphones in situations where they might cause distractions or prevent you from
hearing warning sounds.
•
There are no user serviceable parts in these headphones. Do not attempt any service or repairs on your
own. Refer to the warranty for service, repair or replacement information.
Care and Maintenance
1. Reception is noisy or intermittent
Make sure that the headphones and the paired device are within the Bluetooth operating range of
approximately 33-feet. Make sure the headphones are fully charged as well.
2. No Sound
Make sure that your headphones are properly paired and connected with your Bluetooth enabled
smartphone or music player. Refer to the “Pairing” instructions in this manual and in the manual
supplied with your phone or music player if necessary.
The rechargeable battery in your headphones may be exhausted and need to be recharged. Refer to
the “Charging Your Headphones” instructions in this manual.
3. Unable to Pair/Connect
The pairing settings between the headphones and your smartphone or music player may have been
erased or deleted. Follow the “Pairing” instructions in this manual to re-pair and reconnect the devices.
Turn off any other Bluetooth devices that are not being used to reduce external interference.
4. Some Functions Do Not Work
Your specific model of smartphone may not support some of the functions described in this manual.
Refer to the manual supplied with your phone for further information.
Troubleshooting
Always remember to turn your headphones off if they will not be used for a long period of time. Do
not expose your headphones to extremely hot or cold temperatures for extended periods. Do not
expose them to direct sunlight or leave them in places such as the dashboard of your car on a hot
day. Prevent water or any other liquids from entering the cabinets of your headphones.
Protect Your Hearing
Using these, or any headphones at high volume levels for long periods can result in permanent hearing
damage. Always start listening with volume controls on your headphones and your paired smartphone
or music player at a low level and then gradually increase the volume controls to a comfortable listening level.
The auxiliary input jack allows you to use your B90 Bluetooth headphones as normal headphones so
that you can listen to music on any non-Bluetooth device that is equipped with a 3.5mm headphone
jack.
Connect the included audio cable to the auxiliary input jack on the
bottom of the ‘L’ earpiece of your B90 headphones, and to the
headphone jack of your auxiliary music source.
Your B90 headphones should be in the Power “Off” mode. Use the
volume and track navigation controls on your music player as your
would with any normal headphones.
Important Notes
© 2019 eKids, LLC
8. Using Your Headphones
Note: Some of the functions described below may not be supported on your specific smartphone.
Check with your smartphone owner’s manual to confirm the features supported by your phone.
Bluetooth is a registered trademarks of Bluetooth SIG Inc.
Bluetooth technology is incorporated under license from Bluetooth SIG Inc.
Action Required
When headphones are “Off” press and hold the MFB inward for
3 seconds
until you
hear the "Power On" voice prompt.
Press and hold the MFB for
5 seconds
until your hear the “Power Off” prompt and LED
indicator shuts off
When headphones are “Off” press and hold the MFB inward for
7 seconds
until you
hear the "Pairing" voice prompt. The LED indicator flashes blue and red rapidly.
Make sure your Bluetooth device is “On” and in the Pairing Model. When ekid-B90
appears on your devices menu, select it to complete pairing.
In pairing mode, press and hold the “+” button for
5 seconds
to reset headphone and
enter pairing mode again.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Press the >> button during playback
Press the << button playback
Press and hold the “+” button during playback
Press and hold the “ - ” button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Short press the MFB to end the call and “hang up”.
Press and hold the “MFB” button for
2 seconds
Function
Turn headphones “On”
Turn headphones “Off”
Enter Pairing Mode
Pairing
Reset Bluetooth
Play / Pause
Skip to next track
Skip to beginning of current track
or go to the previous track.
Increase volume
Decrease volume
Answer an incoming phone call
End a call
Siri/Google Assistant function
5. Manually Pairing With a Bluetooth Enabled Smartphone or Music
Player For The First Time
If your smartphone, music player, tablet, or computer is Bluetooth enabled, you may pair these
headphones with your device to listen to music and make or receive calls as long as the two devices are
within the Bluetooth operating range of approximately 33-feet of each other.
Note: Your headphones must be in the Power “Off” mode to begin the manual pairing process.
1. Make sure that your B90 headphones are switched “Off”. Make sure that your smartphone or music
player is “On”.
2. Press and hold the Multi-function button on your B90 headphones for about 6 seconds until you hear
the “Power On” and “Pairing” voice prompts. The LED indicator begins alternately flashing blue and
red to indicate it is trying to pair with a compatible device.
3. If necessary, turn on the Bluetooth function of your phone or music player so that it begins searching
for a compatible device.
4. “ekid B90” should appear on your phone or music player’s compatible devices list. You may also see
a message such as “Not Paired”. Tap on that message to complete the pairing process. If your phone
or music player asks for a “password” to complete the pairing process, enter ‘0000’ on the keypad of
your phone or music player.
5. When pairing is successful the screen on your phone should show “ekid B90 Connected” or similar
message and you will hear the voice prompt say “Your device is connected”. The LED indicator on the
B90 headphones will begin flashing blue two times per second. Your headphones are now ready for use.
NOTE: If your B90 headphones are not able to find a Bluetooth device that is in range and
“discoverable” after 3 minutes, the headphones will automatically power “Off” to preserve the battery.
6. Auto-Linking With A Previously Paired Device
If your B90 headphones were previously paired with a Bluetooth enabled smartphone or music player
they will attempt to auto-link with that device again whenever that device is within the Bluetooth
operating range.
Press and hold the Multi-function button on your B90 headphones for about 3 seconds until you hear
the “Power On” voice prompt. If a previously paired device is found to be within range and turned ‘On’
the B90 will re-link with it automatically. You will hear the voice prompt say “Your device is connected.”
Note: If no previously paired device is found after 3 minutes the auto-linking function stops and your B90
headphones shut off automatically to preserve the battery life.
7. Wearing Your Headphones
Your B90 Bluetooth headphones are supplied with padded ear cushions for long lasting comfort. The
headband can be extended to accommodate almost any head size. There are ‘L’ and ‘R’ markings on
the inside of the headband, When the headphones are worn properly the controls will be on your right
side.
EN
