EKF SC9-TOCCATA, Руководство пользователя

Страница: 37 / 77

SC9-TOCCATA • CompactPCI® Serial CPU Board • 11th Generation Intel® Processors
Graphics
The Tiger Lake H processors are provided with an Intel® X
e
(Gen 12) graphics and media controller,
for attachment of up to four DisplayPort™ 1.4a monitors. Three ports are available from the
SC9-TOCCATA front panel, via Type-C receptacles (DP Alt Mode). For monitors w/o Type-C video
connector use an adapter cable Type-C to DisplayPort™. Suitable Type-C cable connectors can be
screw locked optionally via M2 threads in the front panel (single screw connector type for ports 1-
3, dual screw type for port 4).
The 4th processor DisplayPort™ is wired to the SC9-TOCCATA mezzanine connector HSE2. By
means of a low profile mezzanine module like the S40-NVME, a 4th DP Alt Mode Type-C
receptacle would be available in the SC9-TOCCATA 4HP front panel.
The Tiger Lake H graphics controller supports up to
4 x 4k60 HDR
3 x 4k60 HDR
2 x 8k60 SDR /4k120 HDR /5k120 HDR
1 x 8k60 HDR
Graphics drivers can be downloaded from the Intel® website.
The front panel Type-C receptacles can be used for attachment of either DisplayPort™ monitors,
or USB devices. Both signal groups are provided by the Tiger Lake H processor via multiplexers.
With respect to USB, the SC9-TOCCATA front panel Type-C receptacles conform to USB 3.2 Gen
2x1 (10Gbps data transfer rate). Thunderbolt is not supported on the SC9-TOCCATA.
© EKF -37- ekf.com