User Guide • SC5-FESTIVAL • CompactPCI
®
Serial CPU Board
RTC Reset (J-RTC)
The jumper J-RTC may be used to reset certain register bits of the battery backed RTC core within the
PCH CM238. This can be necessary under rare conditions (e.g. battery undervoltage), if the CPU fails
to enter the UEFI/BIOS POST after power on. Note that installing of jumper J-RTC will neither set
UEFI/BIOS Setup to EKF Factory Defaults nor resets the time and date register values of the RTC (Real
Time Clock). To reset the RTC core the board must be removed from the system rack. Short-circuit the
pins of J-RTC for about 1 sec. Thereafter reinstall the board to the system and switch on the power.
The pin header J-RTC is not stuffed on the SC5-FESTIVAL by default.
NOTE:
It is important to accomplish the RTC reset while the board has no power.
J-RTC
Function
Jumper
Removed
1)
Normal operation
Jumper Installed RTC reset performed
1)
This setting is the factory default.
1
J-RTC
© EKF -76- ekf.com
Содержание CompactPCI SC5-FESTIVAL
Страница 4: ...User Guide SC5 FESTIVAL CompactPCI Serial CPU Board EKF 4 ekf com...
Страница 14: ...User Guide SC5 FESTIVAL CompactPCI Serial CPU Board EKF 14 ekf com...
Страница 33: ...User Guide SC5 FESTIVAL CompactPCI Serial CPU Board EKF ekf com 1 2 3 4 5 6 7 8 4s EKF 33 ekf com...
Страница 42: ...User Guide SC5 FESTIVAL CompactPCI Serial CPU Board SC5 FESTIVAL 8HP Assy w S40 NVME P01 M12 EKF 42 ekf com...