Technical Information C23-SATA • PCIe to SATA RAID Controller Mezzanine Card
© EKF -31- ekf.com
P-KM
As an option, the C23-SATA is available with a pin header that provides the legacy PS/2 keyboard and
mouse signals, derived from the on-board SIO component. A suitable cable harness or small PCB
would be needed in addition, for translation to the PS/2 style DIN round connector(s).
P-KM Keyboard - Mouse PS/2 Signals SMT 2.54mm Pin Header 2 x 5 (241.1.0205.20.00)
+5V Mouse
1
1
2
Clock Mouse
GND Mouse
3
4
Data Mouse
NC
5
6
NC
+5V Keyboard
1
7
8
Clock Keyboard
GND Keyboard
9
10
Data Keyboard
1
short circuit protection by a common PolySwitch self resettable fuse, voltage derived from
+5V_CR carrier board switched power well
P-SATA0 P-SATA1
The C23-SATA will be typically stuffed with two latched SATA signal headers, either right angle style,
or vertical mount, for attachment of system internal SATA drives by cable. TX/RX designation of
signals is with respect to the SATA controller. P-SATA0 corresponds to the SATA channel 0 of the
JMB363 controller, and P-SATA1 is wired to the JMB363 SATA channel 1.
P-SATA0 P-SATA1 #256.007.21.01 Latched Headers
1
GND
2
3
SATA_TX-
4
GND
5
SATA_RX-
6
7
GND
The SATA channels may be used individually, or aggregated as RAID 0/1/10. It is also possible to
include the PATA devices into the RAID management. The latest driver can be downloaded from the
JMicron website (ftp://driver.jmicron.com.tw/jmb36x/).
1
2
2.54mm
© EKF •
ek
f.c
om
241.1.0
205.20.00
Lat
che
d S
A
TA
H
eade
r
25
6.0
07.2
1.01
©
EK
F
ekf
.c
om
