EKF C20-SATA, Техническая информация

Страница: 22 / 28

Technical Information C20-SATA • SATA Dual-Drive Mezzanine Module
Inter-Board Connector
The C20-SATA is equipped with a high speed mezzanine connector J1, mating with the associated
mezzanine connector on the carrier card (side board). The inter-board connector is situated at the
bottom of the C20-SATA and establishes the data path and power link to the carrier board.
J1 is a female connector and comes in either one of the height alternates 4mm or 8mm. The mating
male connector on the carrier board has either 2mm or 10mm mounting height. Hence four alternate
mounting heights are available for the C20-SATA: 6mm, 10mm, 14mm, 18mm. The 6mm headroom
assembly fits entirely into the 4HP profile of the carrier board (single drive).
Since the C20-SATA comes typically mounted as a unit together with the CPU carrier board, there is
normally no need for the user to get access to the inter-board connector. It is described here as a
reference only and for better understanding of the C20-SATA.
Inter-Board Connector
J1 Mezzanine connector, bottom mount, 2 x SATA & drive power
© EKF -22- ekf.com