eKey home CP micro 1 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 64

background image

en

│

3

General

ekey biometric systems GmbH operates a quality management system in
compliance with EN ISO 9001:2008 and is certified accordingly.

Read these operating instructions carefully before use. These operating
instructions form a component of the product. Ensure that they are stored
in a safe place. These operating instructions contain important information
on the product; in particular, its proper use, safety, installation,
commissioning, usage, maintenance, and disposal.

Please contact your dealer for further information about the product.

A large-font version of these operating instructions is available at

http://www.ekey.net

These operating instructions are not subject to updating. We reserve the
right to make technical modifications and change the product's
appearance; any liability for errors and misprints is excluded.

ekey biometric systems GmbH hereby declares that the product conforms
to the relevant European Union directives.

Safe operation and function of the devices can be impaired in the
following situations. Liability due to malfunctioning is transferred to the
operator/user in such cases:

□

The system devices are not installed, used, maintained, or
cleaned in accordance with the instructions

□

The system devices are not used within the scope of proper use

□

Unauthorized modifications are carried out on the system
devices by the operator.

The version of our general terms and conditions in force on the date of
purchase shall apply. See

http://www.ekey.net

Copyright © 2017 ekey biometric systems GmbH.

All content, artwork, and any ideas contained in these operating
instructions are subject to applicable copyright laws. Any transmission,
relinquishment, or transfer of this content or parts thereof to any third
party requires the prior written consent of ekey biometric systems GmbH.
Translation of the original documentation.

Note

Declaration of
conformity

Product
liability and
limitation of
liability

Warranty and
manufacturer'
s guarantee

Copyright
protection

«
...
2
3
4
5
6
...
»

Содержание home CP micro 1

































































Отзывы:

Нет отзывов

Похожие инструкции для home CP micro 1

Max Charge MC-624

Бренд: Balmar Страницы: 8

MAX CHARGE MC-614

Бренд: Balmar Страницы: 20

Бренд: Data I/O Страницы: 88

Бренд: Data Aire Страницы: 13

Бренд: OMC Страницы: 18

Бренд: Paradox Страницы: 2

Бренд: Paradox Страницы: 2

FrameSaver 9120

Бренд: Paradyne Страницы: 20

VeriSafe VS2-NET

Бренд: Panduit Страницы: 6

Бренд: Watts Страницы: 8

Бренд: YASKAWA Страницы: 121

Бренд: YASKAWA Страницы: 17

Бренд: YASKAWA Страницы: 58

Бренд: YASKAWA Страницы: 30

Бренд: Dantherm Страницы: 20

Бренд: National Instruments Страницы: 17

Бренд: Davey Страницы: 12

Бренд: M-system Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды