__TECNOEKA Srl_________________________________________________________ use and instruction manual _
_ page 6 _________________________________________________________________________________________
Safety ther
Safety ther
Safety ther
Safety thermal breaker
mal breaker
mal breaker
mal breaker - The appliance has a manually reset safety thermal breaker. It
protects against excessive dangerous over-temperatures which could be accidentally generated
inside the appliance. This device is located on the back of the oven
5.
5.
5.
5. Use instruction
Use instruction
Use instruction
Use instructions (for the user)
s (for the user)
s (for the user)
s (for the user)
For first use, we advise you to let the appliance to run load-free at maximum temperature for
about one hour. In this way, any unpleasant smells due to thermal insulation and residual work
grease are eliminated.
This appliance must be used solely for the purpose for which it was expressly designed, i.e.
cooking foods in the oven. Any other use is considered unsuitable.
The appliance can be used: for all oven cooking of deserts, pizzas, meat, fish, vegetables, as
well as for gratinating, and for re-conditioning cooled and frozen foods.
When placing food in the cooking compartment, leave a space of at least 40 mm between
pans in order not to over-obstruct air circulation.
Do not use pans with higher than necessary edges: edges are barriers which prevent the
circulation of hot air.
Warm up the oven before every cooking operation to obtain maximum uniformity.
Do not salt foods in the cooking compartment.
6.
6.
6.
6. Residual risks (for the user)
Residual risks (for the user)
Residual risks (for the user)
Residual risks (for the user)
After a cooking operation, open the door cautiously, to avoid a violent outflow of heat which
could cause burns.
While the oven is in operation, pay attention to the hot zones (marked on the appliance) of
its external surfaces.
Place the machine on a bench or similar support, at a height of at least 85 cm from the floor.
The bench or support must be able to support the weight of the machine and house it
correctly.
The appliance contains electrical parts and must never be washed with a jet of water or
steam.
The appliance is electrically connected: before attempting any cleaning operation, cut power
to the appliance.
Do not use the door handle to move the appliance (the glass panel may break).
When the tilting door is wide open, there is the risk that things could be placed on the
surface with the risk of irreparably damaging the door hinges.
7.
7.
7.
7. How to use the control panel
How to use the control panel
How to use the control panel
How to use the control panel
Control Panel symbol legend
Control Panel symbol legend
Control Panel symbol legend
Control Panel symbol legend::::
-
"End of cooking" programming knob / Programmer indicator light
-
Control thermostat knob / Temperature indicator light
Fig. 1
Fig. 1
Fig. 1
Fig. 1
Programmer Knob
Programmer Knob
Programmer Knob
Programmer Knob
Allows start up of the
appliance.
Fig. 2
Fig. 2
Fig. 2
Fig. 2
Thermo
Thermo
Thermo
Thermostate knob
state knob
state knob
state knob
Set the desired
temperature in to the
cooking chamber
