TECNOEKA Srl ______________________________________________________________ use and instruction manual
page 10 __________________________________________________________________________________________
Possible faults
Possible faults
Possible faults
Possible faults
Type of fault
Type of fault
Type of fault
Type of fault
Cause
Cause
Cause
Cause
Corrective act
Corrective act
Corrective act
Corrective action
ion
ion
ion
Control panel
completely off (the oven
does not work)
-
Incorrect electric connections to the
mains
-
Check the mains connection
-
No mains voltage
-
Restore mains voltage
-
Thermal break safety device tripped
-
Reset the thermal break safety
device
Cooking cycle set: the
oven does not work
-
Door open or ajar
-
Close the door
-
Damaged magnetic sensor
-
Contact a qualified technician to
repair the sensor
Door closed: steam
comes out of the seal
-
Seal not fitted correctly
-
Check the seal fitting
-
Damaged seal
-
Contact a qualified technician to
repair the seal
-
Handle prong loosened
-
Contact a qualified technician to
repair the prong
The oven does not cook
evenly
-
One of the motors is blocked or turns
slowly
-
Contact a qualified technician to
repair the motor
-
The motors do not go into reverse
-
Contact a qualified technician to
repair the motor
-
Heating element not powered or is
damaged
-
Contact a qualified technician to
repair the element
Lighting lamp in the
cooking chamber does
not work
-
Damaged lamp
-
Change the lamp
-
Damaged lamp feeder
-
Contact a qualified technician to
repair the feeder
The thermo safety
device turns on in
continuous
-
Device damaged
-
Contact a qualified technician to
repair the feeder
-
Regulating thermo state damaged
-
Contact a qualified technician to
repair the feeder
11. Technical service
11. Technical service
11. Technical service
11. Technical service
Before leaving the factory, the appliance was completely regulated and tested by expert
specialised personnel to guarantee the best operating results.
All repairs and settings must be performed with utmost care and attention, respecting national
safety regulations in force. Always contact your retailer or our nearest Service Centre, giving
details of the problem, the appliance model and the serial number (on the rating plate on the
rear panel). For any maintenance the user can contact Tecnoeka by calling the telephone
numbers on the cover or going to
www.tecnoeka.com
www.tecnoeka.com
www.tecnoeka.com
www.tecnoeka.com
.
12.
12.
12.
12. Informations to the consumers
Informations to the consumers
Informations to the consumers
Informations to the consumers
Further to Directive 2002/96/EC, the symbol of the crossed rubbish skip on
the appliance means that at the end of its life, the product must be disposed
of separately from the other rubbish. The user must hand the appliance to a
specialised waste collection centre for electric and electronic equipment.
The separate collection of the rubbish and subsequent treatment, recovery and disposal help to
produce other equipment using recycled materials, reducing the negative effects on the
environment and public health, which would be caused by incorrect management of the
rubbish. Should the user dispose of the product abusively, administrative sanctions would be
applied
.
