- 9 -
RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS
It is mandatory to use at least one of each type of port and all
remaining ports should be sealed using the supplied plugs. The
EK-Loop Multi Allen Key (6mm, 8mm, 9mm) may be used to install
all EK fittings, do not use excessive force.
If one of the prescribed components will not be installed (ie.
bottom radiator or GPU block) then one IN and one OUT port
must still be joined together in order for this distribution plate
to function!
Installing this distro plate in the front of the case allows two
radiator configurations based on your motherboard form factor.
7-SLOT CONFIGURATION
ITX / mATX / ATX
CPU OUT/IN
RADIATOR 2 IN
RADIATOR 2 OUT
GPU IN/OUT (SLOT 1)
GPU IN/OUT (SLOT 2)
GPU IN/OUT (SLOT 3)
RADIATOR 1 OUT
DRAIN
RADIATOR 1 IN
GPU IN (SLOT2)
RADIATOR 1
Up to SE360 (bottom)
R
A
DIA
T
O
R
2
U
p t
o S
E
2
4
0 (
si
d
e)
