- 13 -
CONNECTING THE D-RGB LED STRIP
Plug the 3-pin connector of the distribution plate D-RGB LED light
to the D-RGB HEADER on the motherboard. The LED will work if the
pin layout on the header is as follows:
+5V, Digital, Empty, Ground.
D-RGB Header
RGB Header
CONNECTING THE PUMP
The EK-D5 PWM pump has two connectors.
1. 4-pin Molex:
It must be connected directly to your PSU at all
times as it is used to power the pump.
2. 4-pin PWM fan:
It can be connected to your motherboard’s CPU
Fan or designated water pump header. It can also be connected to
a controller. This cable is used to control and report the rotational
speed of the pump. If it’s not connected, the pump will run at
maximum speed (100% PWM).
4-pin molex
connector
4-pin PWM fan
connector
