- 9 -
STEP 2
Carefully remove the complete active backplate with the terminal.
Additional two (2) O-rings 14 x 1 EPDM50 need to be removed.
STEP 2
TERMINAL
O-RING 14 x 1 mm
ACTIVE
BACKPLATE
STEP 3
M3.5-M2.5 x 11.3
STANDOFF
PCB
CARDBOARD
M2.5-M3 x 6.6
STANDOFF
STEP 3
Unscrew ten (10) M2.5-M3 x 6.6 standoffs with the included
tool (EK-Plug out Spludger Tool). Make sure not to unscrew the
M3.5-M2.5 x 11.3 standoff! In case the M3.5-M2.5 x 11.3 standoff
unscrews, carefully tighten it back with the 4 mm wrench.
After removing the standoffs, the PCB cardboard needs to be
removed. The PCB cardboard is printed on 1:1 scale.
For this step, you will need:
EK-Plug Out Spludger Tool
