14
Chapter2SettingUp
Digitalconnection
(DisplayPort)
Digitalconnection
(DVI)
or
Signalcable:DisplayPort-DisplayPort
(supplied)
Signalcable:DVI-D-DVI-D(DualLink)
(supplied)
3.
Plug the power cord into a power outlet and the power connector on the
monitor.
4.
Connect the USB cable when using RadiCS LE or ScreenManager Pro for
Medical.
ConnectingtotheMonitor
ConnectingtoaComputer
5.
Press to turn on the monitor.
The monitor’s power indicator lights up green.
6.
Turn on the PC.
The screen image appears.
If an image does not appear, refer to “Chapter 3 Troubleshooting” (page 15) for additional advice.
Attention
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Turning off the main power switch
or unplugging the power cord completely shuts off power supply to the monitor.
2-3. Adjusting the Screen Height and Angle
Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel of the screen to
the best condition for working.
Attention
• Be sure that the cables are correctly connected.
