Eizo RadiForce G11-S, Руководство пользователя

Страница: 29 / 44

English
6. ATTACHING AN ARM STAND
29
6. ATTACHING AN ARM STAND
The LCD monitor can be used with an arm or stand by removing the tilt stand and
attaching the arm stand to the LCD monitor.
NOTE
x
If you will use the arm or stand of other manufacturers, confirm the followings to the
manufacturers before selecting.
-
Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)
-
Supportable Weight: Total weight of the monitor (without stand) and attaching
equipment such as a cable
-
TÜV/GS approved arm or stand
x
Please connect cables after attaching an arm stand.
Setup Procedure
1.
Pivot the panel in the counter-clockwise to fix in portrait position.
2.
Hold the center of the stand mounting cover and slide them
rightward or leftward to remove the mounting cover.
3.
Lay the LCD monitor down. Do not scratch the panel.
4.
Remove the tilt stand by loosening the screws. (4 pcs of M4 x 15 mm
BZn/Fe)
5.
Attach an arm stand to the LCD monitor securely.
Stand mounting cover