Eizo RADI FORCE RX430, Руководство пользователя

Страница: 21 / 55

21
Chapter3SettingMonitor
3-7. Enabling/Disabling DC5V output
This function allows you to enable/disable the DC5V output.
Procedure
1. Press to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose <DC5V Output> from <Optional Settings>, and press .
4. Select ”On” or “Off” with or , and press .
5. Select “Finish” with or .
6. Press
.
The Optional Settings menu is closed.
3-8. Setting the Input Signals <Signal Selection>
Signals can be selected based on your operating environment (DVI signal input).
Attention
• A supported graphics board is required to display.
• Refer to the manual of the graphics board.
Procedure
1. Press to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The Optional Settings menu appears.
3. Choose <Signal Selection> from <Optional Settings>, and press .
4. Select “Dual Link” or “Single Link” with or, and press .
5. Select “Finish” with or, .
6. Press
.
The Optional Settings menu is closed.