background image

For U.S.A, Canada, etc.  (rated 100-120 Vac) Only 

FCC Declaration of Conformity 

We, the Responsible Party 

EIZO NANAO TECHNOLOGIES INC. 
5710 Warland Drive, Cypress, CA 90630 
Phone:  (562) 431-5011

declare that the product 

Trade name:  EIZO 
Model:  RadiForce GS510

is in conformity with Part 15 of the FCC Rules.  Operation of this product is subject to the 
following two conditions:  (1) this device may not cause harmful interference, and (2) this 
device must accept any interference received, including interference that may cause undesired 
operation. 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide 
reasonable protection against harmful interference in a residential installation.  This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a 
particular installation.  If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures. 

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

Changes or modifications not expressly approved by the party responsible for compliance 
could void the user’s authority to operate the equipment. 

Note

 

Use the attached specified cable below or EIZO signal cable with this monitor so as to keep 
interference within the limits of a Class B digital device. 

AC Cord 

Shielded Signal Cable (enclosed) 

 

 

 

Canadian Notice 

This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada. 

 

Содержание IEC60601-1-1


































Отзывы: