28
Chapter 3 Setting Monitor
●
To mute the sound temporarily
Procedure
1. Press
on the remote control.
Mute sound temporarily.
By pressing the button again or pressing
, the sound comes back.
Note
• The mute setting can also be released by pressing
on the monitor.
• While the monitor is muted, press
or
on the monitor to decrease the volume setting.
Attention
•
If a speaker with built-in amplifier is attached to the line output connector, adjust the volume on the external
speaker. You cannot adjust the volume using the remote control of the monitor.
• When you try to mute the speaker with all the conditions below, “This operation is not available on current
status” is displayed.
- The headphones are not connected.
-
A speaker with built-in amplifier is attached to the line output connector.
3-3. To adjust the sound level
The input sound level can be adjusted.
The volume difference may occur depending on the kinds of input signals, since the average sound level
of the external device differs. You can reduce volume differences by adjusting the sound level. For
example, if the volume difference of HDMI1 and HDMI2 input signals becomes large, you can reduce the
volume difference between them by raising the “Sound Level” of the lower volume side.
Adjustable range
-1 to 1
Procedure
1. Choose “Sound” in the Setting menu, and press
.
2. Choose “Sound Level” in the “Sound” menu, and press
.
The “Sound Level” menu appears.
3.
Use
or
for adjustment.
4. Press
to exit the adjustment.
Attention
• This function is applicable to sound from the monitor speakers and headphones.
