Eizo FLEXSCAN T561 -, Руководство пользователя

Страница: 18 / 36

18
3. SCREEN ADJUSTMENT
< Others >
• To set the power save
There are two power save settings choose the setting which matches your environment.
•
Do your part to conserve energy, turn off the monitor when you are finished using it.
Complete energy use can only be accomplished by disconnecting the monitor’s
power supply cord from the plug receptacle.
1. With PC’s power saving system (VESA DPMS
p.30)
)
The monitor detects the signal from the PC and executes the power saving accordingly,
as shown in the table below.
< PowerManager >
Select “On”.
Operate the mouse or keyboard to return to a normal
screen.
[Power saving system]
PC Signal Screen LED Power consumption
ON Operation Green 110 W (normal)
STAND-BY Blank screen Green 80% of normal
SUSPEND Power save (Mode 1) Flashing green Less than 10 W
OFF Power save (Mode 2) Yellow Less than 3 W
2. With Monitor’s off timer system
Without the PC’s power saving system, the off timer allows the monitor to Enter a
power save mode after a predetermined amount of time has lapsed.
< Off Timer >
Select “Enable” and press the left/right keys on the control
pad to set the “On period”. (1 to 23 hours)
Press any direction of the control pad or to turn the power
off then on again to retun to a normal screen.
[Power saving system]
Time Screen LED Power consumption
On period (1-23) Operation Green 110 W (normal)
Last 15 min. in
“On period”
Advance notice* Flashing green 110 W (normal)
“On period” expired Power save mode Flashing yellow Less than 3 W
*
To delay entering the power save mode, press any direction of the control pad
during the advance notice mode.