Eizo FlexScan L371, Руководство пользователя

Страница: 24 / 57

24
4. ADJUSTMENT
4.
Set the Contrast of the screen.
Adjust the “Contrast”
This controls the contrast of the screen. The contrast is changed by adjusting the
gain level of the input signal to obtain the maximum contrast.
Select the “Contrast/Brightness” in the screen menu..
[Auto]
Push the Auto adjustment button on the front panel while displaying the “Contrast/
Brightness” menu to automatically adjust the contrast. The screen blanks for a
moment, and adjusts the contrast to the maximum contrast level of the current input
signal.
[Manual]
Adjust the contrast level by using the right and left buttons until the percentage
color is on the border of white and yellow or fully yellow. ( In the case of the
percentage color switching from white to yellow, please note that this is not an error
but actually the most optimum adjustment point.)
5.
Set the Brightness of the Screen.
Adjust the “Brightness”
This controls the brightness of the screen. The brightness of the entire screen is
controlled by changing the brightness of the backlight.
Select “Contrast/Brightness” in the screen menu and adjust by using the up and
down buttons.
• Directly pressing the control buttons also adjusts the contrast and brightness. Press
the “Enter” button to save and exit the settings after the adjustment.
Too High Too Low OK