16
2. CONNECTING UP
3.
Plug the power cord into the power connector on the rear of the
monitor.
WARNING
• Use the enclosed power cord. If using the power cord
other than the enclosed one, follow these guidelines.
[USA and Canada]
Use a UL LISTED/CSA LABELED or CERTIFIED power cord
set meeting the following specifications:
* Rating:
min. 125 V, 10 A
* Length:
max.2.0 m
* Type:
SVT
* Plug type: NEMA 5-15P, Parallel blade,
Grounding type, 125 V, 10 A
[Europe]
Use a proper European standard approved power cord
meeting the following specifications:
* Rating:
min. 250 V, 10 A
* Length:
max.2.0 m
* Type:
H05VV-F 3G 1 mm
2
Use a plug type approved by the country where you reside.
Failure to do so may cause fire or electric shock.
4.
Replacing the connector cover and the rear cover.
1) Insert the rear cover into the inlets at the bottom of the stand.
2) For smooth attachment, the monitor should be tilted forward. Attach the
connector cover to the rear panel of the monitor.
5.
Plug the other end of the power cord into a power outlet.
WARNING
• The equipment must be connected to a grounded main
outlet.
6.
Turn on the monitor’s main power and then switch on the PC’s power.
Whenever finished, turn off the PC and the monitor.
2
1
Содержание FlexScan L371
Страница 1: ...ENGLISH ...
