23
Chapter 3 Advanced Adjustment/Setting
Function
Setting Range
Description
Input Color Format
Auto
*2
YUV 4:2:2
*3
YUV 4:4:4
*3
YUV
*4
RGB
The color format of the input signal can be specified.
Try changing this setting if colors are not displayed
correctly.
Note
•
This setting is required when a DVI device is
connected to the monitor via the HDMI connector
port using a DVI-HDMI conversion connector.
*2 Only enabled when input signal information according to which the setting can be automatically
determined is detected
*3 Only enabled during HDMI input
*4 Only enabled during DisplayPort input or USB-C input
Function
Setting Range
Description
Input Range
Auto
Full
Limited
Depending on the PC, black and white of the video
level of the signal output to the monitor may be limited.
If a limited signal is displayed on the monitor, black
will appear faint and white will appear dull, leading to a
reduction in contrast. The output range of such signals
can be extended to match the actual contrast ratio of
the monitor.
•
“Auto” Automatically identifies the brightness
range of the input signal and displays the image
accordingly.
•
“Full” Extension of the signal output range is not
performed.
•
“Limited” Extends the signal output range through
0 to 255 and displays the image.
●
Preference Settings
The monitor’s settings can be configured to suit the usage environment or personal preference.
Function
Setting Range
Description
Menu Rotation
0°
90°
270°
Change the orientation of the Setting menu when using the monitor
screen in the portrait display position.
Note
•
Make sure that the cables are correctly connected.
•
PC settings must be configured to use the monitor in a portrait
position.
•
The menu cannot be rotated by 180˚. To install the monitor rotated
by 180˚, perform monitor adjustment/settings before rotating the
monitor.
