7
En
gli
sh
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact
your local EIZO representative.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Analog signal cable : MD-C87
• Stereo mini jack cable
• USB cable: MD-C93 (for FDX1501T-A only)
• EIZO LCD Utility Disk (CD-ROM)
• Setup Manual (this manual)
• Clamper : 2 pcs.
•
Screws for fixing the clamper M4 × 14 : 2 pcs.
(Prepare a screwdriver.)
Attention
• This product does not include a power cord. Please provide separately a power cord which meets the usage
requirements. For more information, please contact your local EIZO representative.
Controls and Functions
1
2
3
4
5
6
9 10
11 1213
7
14
8
8
16
15
Setting menu
*1
・
FDX1501-A
・
FDX1501T-A
Attaching the clamper
1. button
Displays the volume adjustment menu. (Press
or to adjust volume.)
2. button
Switches input signals for display.
3. button
Changes Color Mode.
4. button
Displays the Setting menu, determines an item on the menu screen, and saves
adjusted values.
5. button
• Provides the menu selection as well as the adjustment and setting of a function.
• Displays the Brightness menu.
6. button
Turns the power on or off.
7. Power indicator
Indicates the monitor’s operation status.
Blue : Operating Orange : Power saving mode OFF: Main power/Power off
8. Speaker
Outputs audio source.
9. Main power switch
Turns the main power on or off.
10. Power connector
Connects the power cord.
11. Input signal connector
Left : DVI-D connector / Right : D-Sub mini 15-pin connector
12. USB upstream port
(for FDX1501T-A only)
*2
Connects a PC and monitor via a USB cable when this product is used as a touch
panel monitor.
13. RS-232C port
(for FDX1501T-A only)
*2
Connects a PC and monitor via a RS-232C cable when this product is used as a
touch panel monitor.
14. Stereo mini jack
Connects the stereo mini jack cable.
15. Stand
Used to adjust the angle of the monitor screen.
16. Screw holes for securing
the clamper (2)
Attach the clamper to prevent the cable from falling off. Fit the cable in the clamper
and fit it with the set screw (M4 × 14), as shown in the diagram above.
*1 For instructions for use, refer to the User’s Manual on the CD-ROM.
*2 These ports cannot be used at the same time. When cables are connected to both ports, the USB port is
prioritized.
