84
Chapter 5 Live Image Screen Settings
5-11. Performing Advanced Settings for Camera Video
Perform advanced settings for displaying camera video on the Live Image Screen. Normally, it is not
necessary to change these settings.
Attention
• Changing these settings may result in camera display failure.
1.
Select “Other” for “Live Image Screen”.
2.
Select each setting item from the list box.
Item
Detail
Setting range
B Frame Decode
Buffer *1
When set to “On”, streams that include B frames can be displayed,
but the following phenomena occur.
• Camera video display is delayed.
• Video with a low frame rate such as 1 fps may not be displayed.
On / Off
Suspend While in
Background *1
When set to “On”, only communication with the camera displayed on
the Live Image Screen is maintained, and communication with the
non-displayed cameras is disconnected each time. Communication
with the cameras can be minimized, but the following phenomena
occur.
• Since communication with the camera starts at the timing
when the display starts, it takes time until the camera video is
displayed.
On / Off
Sync Timestamp *1
When set to “On”, livestreaming is displayed according to the time
stamp received from the camera. The screen stuttering of the
display may improve, but the following phenomena may occur.
• Camera video display is delayed due to an increase in the
buffering time.
• Performance will decrease, such as decrease in the frame rate
that can be displayed, due to the increased load on the CPU.
On / Off
