43
Chapter 3 System Settings
●
Failover Settings
1.
Select “Failover Settings” under Failover.
The “Failover Settings” screen is displayed.
2.
Set the following items.
Item
Description
Range
Failover
Select whether to enable or disable the function.
Off / On
Detection Method
Select the detection method.
Note
• Failure detection is performed only for the camera
currently displayed. Cameras that are not displayed
are not applicable.
Failure with all cameras / Failure
with any camera
Detection Sensitivity Sets the time required to pass after video data
reception has stopped for a communication failure to be
detected.
• High
If video data reception stops for several seconds, a
communication failure is detected.
• Low
If video data reception stops for about 30 seconds,
a communication failure is detected.
Low / High
3.
Click “Apply”.
