Eizo CuratOR EX3241, Инструкция по эксплуатации

Страница: 14 / 31

14
Chapter 1 Introduction
Rear
DC
12G-SDI
IN OUT
IN OUT
3G-SDI
IN OUT
DVI-D 1 RS-232C USB
IN OUT
DVI-D 2
IN
DisplayPort
IN
5V 2A
HDMI
IN
11 17 13 12 20 21 22 16 18
15
14 19
11. DC IN terminal Connects the DC OUT terminal of the AC adapter.
12. DC OUT terminal
Used when providing 5V power to a peripheral device.
Attention
• Do not connect this to the terminal to measurement devices or medical
equipment which will come into contact with a patient.
13. (Equipotential) terminal This terminal is used to equalize potential voltage between equipment. Connect
using an equipotential plug.
14. SDI 1/2 input terminals
(BNC type)
Connect from devices with an SDI output terminal.
SDI 1 is compatible with 12G / 6G / 3G / HD-SDI, and SDI 2 is compatible with 3G /
HD-SDI.
15. SDI 1/2 output terminals
(BNC type)
The signal into the SDI input terminal is output as is.
SDI 1 is compatible with 12G / 6G / 3G / HD-SDI, and SDI 2 is compatible with 3G /
HD-SDI.
16. DVI-D 1/2 input terminals
(DVI-D)
Connect from devices with DVI-D output.
17. DVI-D 2 output terminal
(DVI-D)
The signal into the DVI-D 2 input terminal is output as is.
18. DisplayPort input
terminal (DisplayPort)
Connect from devices with DisplayPort output.
19. HDMI cable holder Secures the HDMI cable that is connected to the monitor.
20. HDMI input terminal
(HDMI)
Connect from devices with HDMI output.
21. RS-232C terminal
(D-Sub 9pin)
Controls this product by connecting it to an external device.
Input switching and various adjustments are possible from connected external
devices.
22. USB terminal (USB
upstream port, Type-B)
Controls this product by connecting it to an external device.
The connected external device can change inputs and make other adjustments.