10
ENG
SOUND
AROUND
Controller
User Manual
2.1.4 Connection and switches setup
•
Connect the wires to the Controller Terminals.
•
Connect the Ethernet connector to the Controller if applicable.
•
Select the switches to choose the volume level audio output (maximum, medium, low)
and the mono/stereo sound output.
2.1.5 Installing the Controller
Insert the Controller in the wall and secure with screws.
Fix the frame to the Controller.
Take care about the position of
the frame: the ventilation holes must
be at the bottom, NOT at the top
(the frame has one unique position).
BACK PANEL
ETHERNET
RJ45 connector
SWITCH
PROGRAMMING
Max Volume
Mid Volume
Low Volume
Stereo
Mono
TERMINALS
VDC = DC power input (12-24 Vdc)
GND = Ground
R+ / R- = Right Speaker Output
L+ / L- = Left Speaker Output
VENTILATION HOLES
On
On
On
On
On
3
3
3
3
3
2
2
2
2
2
1
1
1
1
1
