23
alrm2
alrm1
1
1
PRG
1
PRG
1
PRG
2
abc
PRG
2
abc
1
2
1
2
Key Sequence
Display Visual
alarm 1
alarm 2
How Are They Activated/Cleared?
By using the quick functions...
The icons indicate the state of the alarms (activated/cleared).
How Is It Programmed?
Access the program menu. Select the on/off status, time and days of the week the
function should operate, as well as the function mode and volume. See 5.1.
Programming Alarm 1 and 2
The control unit is equipped with two alarms that can be individually programmed and can operate in two different modes:
Operates whether the control unit is off or on.
At the time and days programmed, the control unit powers on and a specific beep signal is sounded. The alarm 1 and alarm 2 beeps
are different and have programmable volumes.
Is equipped with a
“
snooze
”
function: a short key press of any key returns the control unit to its previous state (stand-by or music)and
after 4' the beep signal sounds again.
To definitely cancel the alarm, press any key until a continuous beep sounds: it will return to its previous state (stand-by or music) and
the alarm function ends.
If the control unit is powered off or on during the
“
snooze
”
period, the alarm function ends.
Also, if 4' elapse without any key press, the control unit returns to its previous state (stand-by or music) and the alarm function ends.
Operates only when the control unit is off.
At the time and days programmed, the control unit powers on with the last music channel selected.
The volume is programmable and different for each of the two alarms.
Beep Mode Alarm
Music Mode Alarm:
\
\
\
\
\
\
\
\
\
6.11 Alarms
CC-1035ENG-09
