- 4 -
1.
Safety information and precautions:
Do not manipulate the component in any way (loss of warranty, danger of elec-
tric shock)
For electrical safety reasons never operate the disc player without its top cover.
The disc player must be protected from moisture
Never disconnect the protective conductor
The safety fuse must only be exchanged for one of the same value of 0.5A
Please contact your dealer / distributor or us directly prior to changing the tubes
2.
Package contents
EINSTEIN The Source Ultimate
Compact Disc player
EINSTEIN The Remote
Remote control including batteries
Disc clamp
EINSTEIN Power cord custom made
Gloves
Owner’s manual
3.
Technical information
For mechanical reasons we utilize a top loading disc mechanism, which in con-
junction with carefully applied vibration controls, is decoupled from the main
chassis. We utilize a 24-bit digital to analog converter with a passive analog filter
and a powerful low impedance tube output stage. Both the digital and analog
sections have separate power supplies.
4.
Placement
When selecting a placement for your disc player, please consider proper ventila-
tion of the unit as well as a solid platform for the unit to be placed on. The Source
should never be placed on top of other components nor should other compo-
nents be placed on top of it. Separately available equipment racks can positively
affect the sound quality of your new disc player.
5.
Power
The Power supply socket is located at the back of the unit. This connector also
includes the fuse and one spare. Please make sure that the unit is powered off
and not connected to the power outlet prior to exchanging the fuse. 230V/115V
are at the safety clip, EXTREME SHOCK HAZARD!
Attention:
the disc mechanism of the
EINSTEIN The Source Ultimtae
disc player is
secured via three screws which are in place during transportation. Two of these
are located at the bottom of the unit, the remaining one is in the disc mechanism
section. These red colored screws are to be removed prior to disc playback!
Likewise, the screws must be put back in place prior to the unit being shipped or
moved in order to avoid damage to the disc mechanism. Please fasten these
screws “hand-tight”.
