EINHELL TC-SM 2131 Dual Скачать руководство пользователя страница 37

Страница: 37 / 60

- 37 -

3. Safety of persons

a) Be careful, watch what you are doing and

use an electric tool sensibly. Do not use

the tool if you are tired or under the in

ence of drugs, alcohol or medication.

moment of distraction when using the electric

tool can result in serious injuries.

b) Wear personal protection equipment

and always wear safety goggles.

Wearing

personal protection (such as dust masks,

non-slip safety shoes, safety helmet or ear

protection, depending upon the type and use

of the electric tool) reduces the risk of injury.

c) Make sure that the appliance cannot start

up accidentally. Ensure that the electric

tool is switched o

ﬀ

before you connect

it to the power supply and/or insert the

battery, or pick up or carry the tool.

If your

nger is on the switch whilst carrying the elec-

tric tool or if you connect the appliance to the

mains when it is switched on, this can lead to

accidents.

d) Remove keys and wrenches before swit-

ching on the electric tool.

A tool or key

which comes into contact with rotating parts

of the appliance can lead to injuries.

e) Avoid abnormal working postures. Make

sure you stand squarely and keep your

balance at all times.

In this way, you can

control the electric tool better in unexpected

circumstances.

f) Wear suitable work clothes. Do not wear

loose clothing or jewellery. Keep hair, clo-

thes and gloves away from moving parts.

Loose clothing, jewellery or long hair can get

trapped in moving parts.

g) If vacuuming devices and draining de-

vices can be

tted, make sure that these

are correctly attached and correctly used.

The use of a dust extraction system can redu-

ce the danger posed by dust.

4. Usage and treatment of the electric tool

a) Do not overload the appliance. Use the

correct tool for your work.

You will be able

to work better and more safely within the gi-

ven performance boundaries.

b) Do not use an electric tool with a defec-

tive switch.

An electric tool that cannot be

switched on or o

ﬀ

is dangerous and must be

repaired.

c) Pull the plug out of the socket and/or

remove the battery before making any ad-

justments to the appliance, changing ac-

cessories or put the appliance down.

This

safety measure prevents starting the electric

tool unintentionally.

d) Keep unused electric tools out of the

reach of children. Do not allow people

who are not familiar with the appliance or

who have not read these instructions to

use the appliance.

Electric tools are dange-

rous if they are used by inexperienced people.

e) Clean your electric tool carefully. Check

whether moving parts are functioning

properly and not jamming, whether parts

are broken or damaged enough that the

functioning of this electric tool is a

ﬀ

ec-

ted. Damaged parts must be repaired be-

fore using the appliance.

Many accidents

are caused by badly maintained electric tools.

f) Keep your cutting tools sharp and clean.

Carefully maintained cutting tools with sharp

cutting edges will jam less and are easier to

control.

g) Make sure to use electric tools, accesso-

ries, spare parts, etc. in accordance with

these instructions. Take the conditions

in your work area and the job to perform

into account.

Using electric tools for any

purpose other than the one for which they are

intended can lead to dangerous situations.

5. Service

a) Have your electric tool repaired only by

trained personnel and/or the authorized

service agent, using only genuine spare

parts

. This will ensure that your electric tool

remains safe to use.

Special safety information

1. Safety precautions

•

Blades that are deformed or cracked must not

be used.

•

If the table insert is worn, replace it.

•

Use only blades which are recommended by

the manufacturer and comply with EN 847-1.

•

Make sure that the chosen blade is suitable

for the material that is to be cut.

•

If necessary, wear suitable personal protec-

tion equipment. This could consist of:

- Ear plugs to prevent the risk of damaging

your hearing

- A breathing mask to avoid the risk of inha-

ling hazardous dust

- Always wear gloves when handling saw

blades and rough materials. Whenever

practicable, saw blades must be carried in a

container.

Anl_TC_SM_2131_Dual_SPK8.indb 37

10.07.2018 08:16:39

Содержание TC-SM 2131 Dual





























































Результаты поиска

Содержание TC-SM 2131 Dual

Отзывы:

EINHELL TC-SM 2131 Dual, Оригинальная инструкция по эксплуатации, Страница: 37 / 60

Результаты поиска

Содержание TC-SM 2131 Dual

Отзывы: