GB
- 16 -
Restarting
1. Remove the spark plug.
2. Pull the starter cable several times to clean
the oil residue out of the combustion cham-
ber.
3. Clean the spark plug contacts or
fi
t a new
spark plug.
4. Fill the tank.
Transport
To transport the machine,
fi
rst empty the petrol
tank as described in section 2 in the section en-
titled “Storage”. Clean coarse dirt o
ff
the machine
with a brush or hand brush.
7.5 Automatic oil cut-out
The automatic oil cut-out responds if there is too
little oil in the engine. In this case it will not be
possible to start the engine or it will cut out auto-
matically after a short period of time. It cannot be
started again until the engine oil has been topped
up (see point 7.4)
7.6 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
8. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o
ffi
ces.
Anl_SA_TC_PG_1100_SPK8.indb 16
Anl_SA_TC_PG_1100_SPK8.indb 16
24.07.2017 08:05:58
24.07.2017 08:05:58
