3. Intended use
The wet and dry vacuum cleaner is designed for wet
and dry vacuuming using the appropriate filter. The
appliance is not suitable for the vacuuming of
combustible, explosive or harmful substances.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage:
230 V ~ 50 Hz
Power input:
1,600 watts
Container volume:
30 l
Protection class:
II/
쏾
Weight: 5.5
kg
5. Before starting
Important!
쎲
Before you connect the appliance to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
쎲
The appliance may only be connected to a shock-
proof socket.
5.1 Assembling the appliance
5.1 Appliance assembly
Fitting the appliance head (Fig. 2/3)
The appliance head (3) is fastened to the container
(8) by the locking hook (7). To remove the appliance
head (3), open the locking hook (7) and remove the
appliance head (3). When fitting the appliance head
(3), make sure that the locking hook (7) locks into
place correctly.
Assembling the wheels (Fig. 1/14)
Fit the wheels in accordance with Fig. 3-4.
Assembling the vacuum tube holder (Fig. 1/24)
Fit the vacuum tube holder in accordance with Fig. 5.
5.2 Fitting the filter
Important!
Never use the wet and dry vacuum cleaner without a
filter.
Check that the filter is securely fitted at all times.
Fitting the foam filter (Fig. 6/16)
For wet vacuuming, slip the supplied foam filter (16)
over the filter basket (Fig. 1/4). The pleated filter (15)
already fitted upon delivery is not suitable for wet
vacuuming.
Fitting the pleated filter (Fig. 7/15)
For dry-vacuuming, slip the pleated filter (Fig. 1/15)
over the filter basket (Fig. 1/4). The pleated filter (15)
is suitable for dry-vacuuming only.
Assembling the dirt bag (Fig. 8/23)
For vacuuming fine, dry dirt it is recommended that
you also fit the dirt bag. This will ensure that the
pleated filter (15) does not fill up so quickly and
therefore help the vacuuming power last longer. In
addition, it makes it easier to dispose of the dust. Slip
the dirt bag over the vacuuming hole. The dirt bag is
suitable for dry-vacuuming only.
5.3
Fitting the suction hose (
Fig. 1/11)
Connect the suction hose (11) to the corresponding
connector on the wet and dry vacuum cleaner,
depending on the application required (Fig. 9).
Vacuuming
Connect the suction hose (11) to the suction hose
connector (9).
Blowing
Connect the suction hose (11) to the blow connector
(10).
To extend the vacuum tube (11) fit the vacuum hose
(20) onto the tube. The vacuum hose comes with a
telescopic function (Fig. 10). Adjust the vacuum hose
(20) to the ideally required length.
Air regulator (Fig. 1/17)
The air regulator (17) can be fitted between the
suction hose (11) and the suction tube (20). The
suction power of the nozzle can be infinitely adjusted
using the air regulator (17).
GB
10
Anleitung_RT_VC_1600_E_SPK1:_ 21.08.2007 16:22 Uhr Seite 10
