EN
- 8 -
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of these devices can reduce dust
related hazards.
h)
Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles.
A careless action can cause
severe injury within a fraction of a second.
4) Power tool use and care
a)
Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
b)
Do not use the power tool if the switch
does not turn it on and o
ff
.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c)
Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d)
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e)
Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may a
ff
ect the
power tool’s operation. If damaged, have
the power tool repaired before use.
Many
accidents are caused by poorly maintained
power tools.
f)
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g)
Use the power tool, accessories and
tool bits etc., in accordance with
these instructions and in the manner
intended for the particular type of power
tool, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations di
ff
erent
from intended could result in a hazardous
situation.
h)
Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of the
tool in unexpected situations.
5) Battery tool use and care
a)
Recharge only with the charger speci
fi
ed
by the manufacturer.
A charger that is
suitable for one type of battery pack may
create a risk of
fi
re when used with another
battery pack.
b)
Use power tools only with speci
fi
cally
designated battery packs
.
Use of any other
battery packs may create a risk of injury and
fi
re.
c)
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a
fi
re.
d)
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs,
fl
ush with
water. If liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the
battery may cause irritation or burns.
e)
Do not use a BATTERY pack or tool that
is damaged or modi
fi
ed
.
Damaged or
modi
fi
ed batteries may exhibit unpredictable
behaviour resulting in
fi
re, EXPLOSION or
risk of injury.
f)
Do not expose a BATTERY pack or tool to
fi
re or excessive temperature.
Exposure to
fi
re or temperature above 266°F (130°C) may
cause explosion.
g)
Follow all charging instructions and do
not charge the BATTERY pack or tool
outside the temperature range speci
fi
ed
in the instructions.
Charging improperly or
at temperatures outside the speci
fi
ed range
may damage the BATTERY and increase the
risk of
fi
re.
6) Service
a)
Have your power tool serviced by a
quali
fi
ed repair person using only
identical replacement parts.
This will
ensure that the safety of the power tool is
maintained.
b)
Never service damaged BATTERY packs.
Service of BATTERY packs should only be
performed by the manufacturer or authorized
service providers.
Anl_PRESSITO_USA_SPK7.indb 8
Anl_PRESSITO_USA_SPK7.indb 8
24.03.2020 11:14:20
24.03.2020 11:14:20
