11
Assembly and Parts List
3
GB
Ire
MODEL: GQS 2540
After SAleS Support
0151 649 1500
1890 946 244
www.einhell.co.uk
Fig. 4
Fig. 5
Fig. 7
Fig. 6
Before starting the equipment
1
Screw the motor unit (Fig. 4/Item 1) and the base frame (Fig. 4/Item 3) together.
Use the screws (Fig. 3/Item 12) and washers (Fig. 3/Item 13) to do so (See Fig. 5) .
2
Fit the wheels to the base frame. To do so, slide one sleeve each into the hole in
each of the wheels (Fig. 6). Then insert one screw with one washer through each
sleeve (Fig. 7) and screw the wheels to the base frame (Fig. 8). To do so, fit one
washer in front of the tubular rod and one behind it. Press the wheel caps onto
the wheels (Fig. 9).
3
Fit the legs (Fig. 10/Item 11) to the base frame as shown in Fig. 10.
4
Slide the shredded material debris box into the mount with the safety switch
(Fig. 12/Item A) at the front as shown in Fig. 11. Ensure that the shredded material
debris box runs above the guide rails (Fig. 4/Item A).
5
Lock the shredded material debris box with the safety switch (Fig. 12/Item A)
in position by pushing upwards.
56525_34.305.96_11013_ug.indd 11
10/04/2013 10:53