EINHELL BT-WW 1000, Оригинальное руководство пользователя

Страница: 8 / 12

8
GB
^åäÉáíìåÖ|_q|_a|RMN|pmhTW|==NQKMOKOMNO==UWQN=rÜê==pÉáíÉ=NN
7. Cleaning, maintenance and
ordering of spare parts
Always pull out the mains power plug before
starting any cleaning work.
We recommend that you clean the equipment
immediately after you use it.
Clean the appliance regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the
plastic parts in the appliance. Ensure that no
water can get into the interior of the equipment.
7.4 Servicing
There are no parts inside the equipment which
require additional maintenance.
Keep all ventilation holes, safety devices and
the motor housing free of dirt and dust as far
as possible. Wipe the machine with a clean
cloth or blow it with compressed air at low
pressure.
7.1 Cleaning
7.2 Motor does not start
If clamping pressure and belt tension are too
high it can cause starting issues, especially at
higher speed.
Troubleshooting
Loosen belt tension.
Decrease clamping pressure via the hand
wheel (8).
Only use high speed for final and detail work on
the workpiece.
7.3 Carbon brushes
In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important! The carbon brushes should not be rep
laced by anyone but a qualified electrician.
Please quote the following data when ordering
replacement parts:
7.5 Ordering replacement parts
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices, information and order details
go to www.einhell.com.au
The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is
raw material and can therefore be reused or can
be returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local
council.
8. Disposal and recycling