GB
11
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Items supplied (Fig. 1 / 2)
1 Case
2 Grinding
wheels
3 Grinding
belts
4 Flap wheel / diamond cutting wheel / grinding
heads / clamping spindles
5 Cutters / diamond-tipped cutters / sleeves
6 Felt polishers / grinding wheels / arbors
7 Bristle brushes / wire brushes / bits / collet chuck
key / whetstone
8 Drive
unit
9 Grinding
pins
10 Polishing wheels / polishing paste / grinding
wheels
11 Diamond-tipped cutters
12 Cutting-off wheels
13 Flexible shaft
14 Table clamp
15 Telescopic stand rod
3. Layout (Fig. 3)
1 ON/OFF switch
2 Speed controller
3 Collet chuck nut
4 Locking knob for collet chuck
5 Cover
4. Proper use
The Grinding and Engraving Set is designed to
perform drilling, grinding, deburring, polishing,
engraving, cutting, milling and cleaning jobs on
wood, metal and plastic in model-making, workshop
and household applications. Use the tool and
accessories only for those applications described.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Operating voltage of the drive unit:
230V ~ 50 Hz
Power input:
135 W
Idle speed n
0
:
max. 35,000 min
-1
Clamping range:
3 mm
Protection class:
II /
쓑
Weight: 0.61
kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level
71.8 dB(A)
K
pA
uncertainty 3
dB
L
WA
sound power level
82.8 dB(A)
K
WA
uncertainty 3
dB
Anleitung BT-MG 135_SPK1:_ 03.12.2008 9:38 Uhr Seite 11
