12
GB
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety information with due care. Keep these
operating instructions in a safe place so that the
information is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and the safety information as
well. We cannot accept any liability for damage or
accidents which arise due to a failure to follow these
instructions and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety information.
CAUTION
Read all the safety regulations and instructions.
Any errors made in following the safety information
and instructions set out below may result in an
electric shock, fire and/or serious injury.
Keep all safety information and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1. ON/OFF
switch
2. Tool
chuck
3. Battery
charger
4. Charging
adapter
5.
Allen key for changing tools
6. Battery
7. Scraper
8.
Triangular sanding/grinding plate
9. Pushlock
button
10.
HSS saw blade
3. Items supplied
Open the packaging and take out the equipment
with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are present.
Inspect the equipment and accessories for
transport damage.
If possible, keep the packaging until the end of
the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys! Do not let children play with plastic bags,
foils or small parts! There is a danger of
swallowing or suffocating!
Original Operating Instructions
Safety information
Multifunction tool
Triangular sanding/grinding plate
Scraper
Allen key
2 grinding/sanding papers
HSS saw blade
Battery
Battery charger
Charging adapter
4. Intended use
The multifunction tool is suitable for sanding/grinding
small areas. A sanding/grinding tool with a vacuum
extractor must be used for sanding/grinding large
areas.
The equipment is designed for the sanding/grinding
of wood, iron, plastic and similar materials using the
appropriate sanding/grinding paper. Furthermore, the
equipment is intended for sawing wood, plastic and
similar materials, as well as scraping off glued
carpets, filling compound residues, old paint and
similar applications.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anleitung_BT_MG_10_8_Li_SPK1:_ 14.03.2011 13:19 Uhr Seite 12
