EN
- 13 -
c)
When wheel is binding or when
interrupting a cut for any reason, switch
o
ff
the power tool and hold the power tool
motionless until the wheel comes to a
complete stop. Never attempt to remove
the cut-o
ff
wheel from the cut while the
wheel is in motion otherwise kickback
may occur.
Investigate and take corrective
action to eliminate the cause of wheel
binding.
d)
Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed
and carefully reenter the cut.
The wheel
may bind, walk up or kickback if the power
tool is restarted in the workpiece.
e)
Support panels or any oversized
workpiece to minimize the risk of
wheel pinching and kickback. Large
workpieces tend to sag under their own
weight. Supports must be placed under the
workpiece near the line of cut and near the
edge of the workpiece on both sides of the
wheel.
f)
Use extra caution when making a “pocket
cut” into existing walls or other blind
areas.
The protruding wheel may cut gas or
water pipes, electrical wiring or objects that
can cause kickback.
Keep this safety information in a safe place.
2. Layout and items supplied
2.1 Layout (Fig. 1)
1. Spindle
lock
2. On/O
ff
switch
3. Additional
handle
4. Guard
5. Face
spanner
6. Clamping
fl
ange
7. Flange
nut
8. Rechargeable battery (sold separately)
9. Clamp
lever
10. Battery capacity indicator
11. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
speci
fi
ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and su
ff
ocating!
•
Angle grinder
•
Additional handle
•
Face spanner
•
Original operating instructions
•
Safety information
Separately available accessories
18V 1.5Ah P-X-C lithium-ion battery
18V 2.0Ah P-X-C lithium-ion battery
18V 2.6Ah P-X-C Plus lithium-ion battery
18V 3.0Ah P-X-C lithium-ion battery
18V 4.0Ah P-X-C lithium-ion battery
18V 5.2Ah P-X-C Plus lithium-ion battery
18V P-X-C charger
Explore b charger options at
einhellUSA.com
3. Intended use
The angle grinder is designed for the grinding of
metal and masonry using the appropriate grinding
wheel and the appropriate guard.
Warning!
The angle grinder is allowed to be
used for cutting metal and masonry only when
the guard, which is available as an accessory, is
fi
tted.
Anl_Axxio_SPK7_USA.indb 13
Anl_Axxio_SPK7_USA.indb 13
08.05.2019 10:08:29
08.05.2019 10:08:29
