7
8. Use as a jigsaw (Fig. 4)
Place the multi-saw on the material to be cut as
shown in Fig. 4. Switch on the multi-saw and push it
along against the material to be cut. Adapt your cut-
ting speed to the material.
9. Technical data
Rated voltage:
230 V ~ 50 Hz
Power: 650
W
Stroke rate:
500-3000 min
-1
Stroke height:
20 mm
Cutting depth in wood:
115 mm
Cutting depth in iron:
10 mm
Sound pressure level L
pA
:
88,8 dB (A)
Sound power level L
WA
:
99,8 dB (A)
Vibration a
hv
10,2 m/s
2
Totally insulated
II/
쵭
Weight 2,82
Kg
10.Cleaning, maintenance and ordering
of spare parts
Always pull out the mains power plug before starting
any cleaning work.
10.1 Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.
10.2 Carbon brushes
In case of excessive sparking, have the carbon
brushes checked only by a qualified electrician.
Important! The carbon brushes should not be rep
laced by anyone but a qualified electrician.
10.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
10.4 Ordering replacement parts:
Please quote the following data when ordering repla-
cement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
11. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
GB
Anleitung_BFS_600_E_SPK1:_ 29.01.2007 13:08 Uhr Seite 7
