3
4
5
6
5
GB
Unscrew the end plate of the precision circular
saw. Fit the hinge to the end plates as shown.
Screw the M8 square nuts with the M8x10
oval head screws in the end plate.
Fit the two support brackets and the two tubular
supports.
Slide the completely pre-assembled table with
end plate onto the sections of the table. Mare
sure that the square nuts are inserted in the
slot. Then adjust the table so it is parallel to the
machine.
Anleitung TVL 720x720 09.11.2001 11:46 Uhr Seite 5
