Einhell Royal 34.305.42, Руководство по эксплуатации

Страница: 17 / 70

good time to prevent it from overfilling.
To empty it, proceed as follows:
앬
Switch off the device at the ON/OFF switch.
앬
Release the shredded material debris box. To do
so, press the safety switch (Fig. 12/Item A) down.
앬
Take the shredded material debris box out at the
front.
6.8 Adjusting the counter blade (Fig. 14)
The counter blade and cutting unit are perfectly
adjusted at the factory. Only if it suffers wear does
the counter blade require adjustment (switch the
machine on for this purpose). To ensure the best
possible results from your shredder, the gap between
the counter blade (item B) and the shredding blade
(item A) should be approx. 0.50 mm.
There is an adjustment device on the right-hand side
of the plastic housing for this purpose. Turn the knob
clockwise so that the screw (item C) moves towards
the shredding blade. After a half-turn the counter
blade will have moved 0.50 mm closer to the
shredding blade. After completing this adjustment
check whether the blade produces the desired
results.
IMPORTANT: If the shredding blade touches the
counter blade, it will cut it and small metal chips may
fall out of the discharge opening. This is not a fault,
but it must only be adjusted as much as necessary
since otherwise the counter blade will suffer
premature wear.
7. Maintenance and storage
앬
Clean the machine regularly. This will help to keep
the machine in good working order and is the
basis for a long working life.
앬
Keep the vent slots clean while you work.
앬 Clean the plastic body and other plastic parts with
a mild household cleaning agent and a damp
cloth. Do not use any aggressive agents or
solvents for cleaning purposes.
앬
Never clean the shredder by spraying with water.
앬
Prevent water getting inside the machine at all
cost.
앬
Check the chassis securing screws from time to
time to ensure that they are tight.
앬
If you do not intend to use the shredder for a
lengthy period, protect it from corrosion using
environmentally friendly oil.
앬 Store the device in a dry room.
앬
Store the device out of reach of children.
8. Waste disposal
Accessories and packaging should be disposed of in
an environment-friendly fashion, i.e. by taking them
to a recycling depot. Plastic parts are coded for
purposes of separation when recycling.
9. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
앬 Type of machine
앬 Article number of the machine
앬 Identification number of the machine
앬 Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
15
GB
Anleitung RLH_2540_FB_SPK1:_ 25.06.2007 9:21 Uhr Seite 15