EINHELL Expert 4501202, Оригинальная инструкция по эксплуатации, Страница: 25 / 40

GB
25
enable you to work without suffering accidents or
injuries.
Recoil is the result of incorrect or wrong use of the
electric tool. It can be prevented by suitable
precautions, as described below:
n
Hold the saw firmly with both hands, with
fingers and thumbs gripped around the
handles. Steady yourself with your body and
arms in a position in which you can control
the kickback forces.
Provided appropriate
measures are taken, an operator should be
capable of controlling the kickback forces. Never
let go of the chain saw.
n
Avoid abnormal working postures. Never cut
above shoulder height.
This prevents
accidental contact with the tip of the rail and
offers better control over the chainsaw in
unexpected situations.
n
Always use the correct replacement rails and
saw chains recommended by the
manufacturer.
The use of incorrect replacement
rails or saw chains may result in breakage of the
chain and/or kickback.
n
Follow the manufacturer’s instructions for
sharpening and maintaining the saw chain.
The risk of kickback is increased if the depth
limiter is set too low.
More important information:
n
Use an earth-leakage circuit breaker with a trip
current of 30 mA or less.
n
Position the power cable such that it cannot be
caught by branches or the like during sawing.
n
We recommend that first-time users should at
least practice cutting roundwood (logs) on a
sawing trestle or similar.
Residual risks
Even if you use this electric power tool in
accordance to instructions, certain residual risks
cannot be eliminated. The following hazards may
arise in connection with the equipment’s
construction and layout:
n
Cut injuries if no safety clothing is used.
n
Lung damage if no suitable protective dust mask
is applied.
n
Damage to hearing if no suitable ear protection is
applied.
n
Health damage caused by hand-arm vibrations if
the equipment is used over a longer period or is
not properly guided and maintained.
Warning! The electric power tool generates an
electromagnetic field during operation. Under certain
circumstances this field may actively or passively
impede medical implants. To reduce the risk of
serious or fatal injuries, we recommend persons with
medical implants to consult their doctor and the
manufacturer of the medical implant prior to using the
equipment.
Do not lose this safety information.
2. Layout and items supplied
(see Fig. 1-2)
1. Claw stop
2. Front hand guard
3. Front
handle
4. Rear handle
5. Safety lock-off
6. ON/OFF switch
7. Oil tank cover
8. Chain wheel cover
9. Fixing screw for the chain wheel cover
10. Chain tensioning screw
11. Chain oil fill level indicator
12. Cable strain-relief clamp
13. Power cable
14. Rear hand guard
15. Cutter rail
16. Saw chain
17. Cutter guard
n
Open the packaging and take out the equipment
with care.
n
Remove the packaging material and any
packaging and/or transportation braces (if
available).
n
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
transport damage.
n
If possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
3. Proper use
The chainsaw is intended for felling trees and for
cutting trunks, branches, wooden beams, boards etc.
and can be used for cross cuts and longitudinal cuts.
It is not suitable for cutting any materials other than
wood.
Please note that our devices have not been designed
Anleitung_GE_EC_2240_MG_SPK8__ 28.11.12 14:06 Seite 25