20
Service & Parts Manual original Instructions
Part Number 32Z3812 US
Issue 1
PR
ODUC
T
DE
TAILS
J
K
L
M
USB oven programs (J)
9.8
IMPORTANT: Downloading from a USB will clear
all the existing programs.
Check that the key has the correct number/code
for the programs you want to load into the oven
memory.
Select USB from the settings screen.
9.8.1
Slide the USB cover (logo on the oven front)
9.8.2
upwards to insert the USB into the slot.
When the inserted USB stick has finished
9.8.3
flashing, select the required USB symbol, for
example; RECIPES.
Select the new file using the scroll arrows if
9.8.4
required to locate the file. Note; a tinted band over a
file name indicates the file is not available to use.
Double check the file is correct before
9.8.5
selecting OK, if not, select ‘X’ and locate the correct
file.
Progress of the file update is displayed. Once
9.8.6
completed the oven restarts and commences
heating up to the PREHEAT temperature ready to
cook.
Remove the USB and keep in a safe place.
9.8.7
Reposition the USB cover.
Restore Factory Defaults (k)
9.9
Select the factory symbol to replace the
9.9.1
existing oven settings with the original factory
default settings. Note; this action cannot be undone.
Select OK, or select the red cross to cancel
9.9.2
and keep the existing settings.
Temperature Band (L)
9.10
Select the ‘Temp Band’ symbol at which the
9.10.1
oven controls i.e. ±10°C.
Select the required temperature band
9.10.2
checkbox, shown by a green tick. Note; although
the lowest practical Temp Band should be used, if
the set oven temperature falls by more than the
selected Temp Band, the ready to cook mode and
Temp Band are deactivated until the oven reaches
the preheat temperature.
Change Password (M)
9.11
Select the key symbol to change the oven
9.11.1
passwords.
Select the oven Settings or Service symbol.
9.11.2
Enter the existing password and select OK to
9.11.3
confirm.
Enter the new password, select OK.
9.11.4
Confirm new password, select OK.
9.11.5
