Eiki LC-XT6, Руководство по обслуживанию

Страница: 179 / 286

-179-
Troubleshooting
Error
Error
Code
Error Infomation
(See Powe Failure Detection Tree)
Error
Code
Error Infomation
(See Powe Failure Detection Tree)
Normal 0 -
Power Failure
1000 AV, AV 1020 FAN, LAMP4 EX
1001 MOTHR, MOTHER 1021 FAN, MIRROR
1002 MAIN, AD 1022 FAN, LAMP1 IN
1003 MAIN, F FPGA 1023 FAN, LAMP2 IN
1004 MAIN, PIC 1024 FAN, LAMP3 IN
1005 RS232C, LAN 1025 FAN, LAMP4 IN
1006 MAIN, 25V 1026 FAN, PNL B IN1
1007 MAIN, I/O 1027 FAN, PNL B IN2
1008 MAIN, S16V 1028 FAN, PNL R IN1
1009 MAIN, S3.3V 1029 FAN, PNL G IN1
1010 MAIN, S12V 1030 FAN, PNL G IN2
1011 MAIN, KEYSTONE 1031 FAN, PBS IN
1012 MAIN, GAMMA 1032 ERR, PRESSURE
1013 MAIN, S-5V 1033 ERR, SHUT_MTR
1014 MAIN, S5V 1034 PFC, PFC1
1015 FAN, PFC12 COOL 1035 PFC, PFC2
1016 FAN, PFC34 COOL 1036 PFC, PFC3
1017 FAN, LAMP1 EX 1037 PFC, PFC4
1018 FAN, LAMP2 EX 1038 SLOT3,
1019 FAN, LAMP3 EX 1039 SLOT4,
Temperature Error
2000 Temperature error detected on the sensor (IC8811) (Arround the Intake Duct)
2001 Error of the detection (IC8811 communication error)
2101 Error of the detection (IC8851 communication error)
2200 Temperature error detected on the sensors (IC8811, IC8851) (Temp. error between internal and external)
Lamp Error
3000 Lamp1 fails on
3001 Lamp1 goes out
3002 Communication error on Lamp1
3100 Lamp2 fails on
3101 Lamp2 goes out
3102 Communication error on Lamp2
3200 Lamp3 fails on
3201 Lamp3 goes out
3202 Communication error on Lamp3
3300 Lamp4 fails on
3301 Lamp4 goes out
3302 Communication error on Lamp4
System Error
4000 Config Error (FPGA SW)
4001 Config Error (FPGA FINE)
4002 Config Error (FPGA DC)
Filter Error 6000 Clogged filter
Error history log
This projector provides the error history log function. To
check the logs, you need to enter the service mode and
select group no. "
220
" and item no. "
0
" to "
49
". The error
code is displayed on the data column. The description of the
error code is listed on the table below.
* How to enter the service mode and select the group, item
and data value, see "Service adjustment menu opera-
tion".
Group
No.
Item
No.
Data
(Error Code)
91 0
1
2
3
:
:
49
[
<- Latest Error
[
[
[
:
:
[
1. Enter the service mode, and select group no. "
220
" and item no. "
50
".
2 The history log will be reset when the data value is set to "
10
". The value automatically returns to "0".
* How to enter the service mode and select the group, item and data value, see "Service adjustment menu operation".
How to reset the error history log