Eiki LC-XT4E, Руководство по обслуживанию

Страница: 86 / 160

–86–
Electrical Adjustments
S 0 – Temperature Monitor Indication
– 0 LM76 (Temp) Monitor Temp. Sensor (Intake) – – –
– 1 LM76 (Temp) Monitor Temp. Sensor (Inner) – – –
– 2 Thermistor Monitor Temp. Thermistor (Inner) – – –
– 3 Thermistor Monitor DAC value – – –
S 1 – Pressure Monitor Indication
– 0 MPXA4114A(Pressure) Monitor Pressure Sensor – – –
S 10 – RS232C Set
– 0 Baud rate RS232C Baud rate (0 : 9600 / 1 : 19200) 0 / 1 1 –
– 1 RTS/CTS Flow Control RS232C RTS/CTS Flow Control (0 : Disable / 1: Enable) 0 / 1 0 –
– 2 CTS Timeout Second RS232C CTS Timeout 0 ~ 255 0 –
– 3 Serial Address Individual address in RS–232C chain connection 0 ~ 999 1 –
S 20 – Logo On/Off
– 0 Logo On/Off (0 : Menu Operation / 1 : Prohibition) 0 / 1 0 –
S 30 – Color Shading Correction
– 0 Correction On/Off (0 : Off / 1 : On) 0 / 1 1 –
S 40 – Dimmer Control
– 0 Dimmer On/Off (0 : Menu Operation / 1 : Off) 0 / 1 1 –
– 1 Dimmer Level (0 : 200W ~ 15 : 250W) 0 ~ 15 15 –
S 80 – Projector Time
– 0 Projector Time 0 –
S 113 – Reset Frequency Counter
– 0 Lamp 1 Lamp 1 Total Lighting Time 0 ~ 127 0 –
– 1 Lamp 2 Lamp 2 Total Lighting Time 0 ~ 127 0 –
– 2 Lamp 3 Lamp 3 Total Lighting Time 0 ~ 127 0 –
– 3 Lamp 4 Lamp 4 Total Lighting Time 0 ~ 127 0 –
S 115 – Lamp Go Out
– 0 Lamp Go Out 0 : Disable / 1 : Enable 0 / 1 0 –
S 120 – RC KEY Disable
– 0 RC Zoom & Focus Only 0 : Enable / 1 : Disable 0 / 1 0 –
– 1 RC / KEY All 0 : Enable / 1 : RC Disable / 2 : KEY Disable 0 ~ 2 0 –
– 2 Process after Power Fail 0 : Not Recover by KEY / 1 : Recover by KEY 0 / 1 0 –
S 121 – RC Select
– 0 RC Direct Select 0 : Rear & Front / 1 : Front / 2 : Rear / 3 : Disable 0 ~ 3 0
S 140 – Fan Output Level
– 0 Fan A Min (
✽
) Fan A Driving Voltage Adj. at TP7611 0 ~ 255 210 –
– 1 Fan A Max (
✽
) Fan A Driving Voltage Adj. at TP7611 0 ~ 255 10 –
– 2 Fan C Min (
✽
) Fan C Driving Voltage Adj. at TP2661 0 ~ 255 210 –
– 3 Fan C Max (
✽
) Fan C Driving Voltage Adj. at TP2661 0 ~ 255 20 –
– 4 Fan B Min (
✽
) Fan B Driving Voltage Adj. at TP2671 0 ~ 255 200 –
– 5 Fan B Max (
✽
) Fan B Driving Voltage Adj. at TP2671 0 ~ 255 25 –
– 6 Fan D1 Min (
✽
) Fan D1 Driving Voltage Adj. at TPFN1 0 ~ 255 110 –
– 7 Fan D1 Max (
✽
) Fan D1 Driving Voltage Adj. at TPFN1 0 ~ 255 30 –
– 8 Fan D2 Min (
✽
) Fan D2 Driving Voltage Adj. at TPFN2 0 ~ 255 130 –
– 9 Fan D2 Max (
✽
) Fan D2 Driving Voltage Adj. at TPFN2 0 ~ 255 40 –
– 10 Fan D3 Min (
✽
) Fan D3 Driving Voltage Adj. at TPFN3 0 ~ 255 110 –
– 11 Fan D3 Max (
✽
) Fan D3 Driving Voltage Adj. at TPFN3 0 ~ 255 30 –
– 12 Fan D4 Min (
✽
) Fan D4 Driving Voltage Adj. at TPFN4 0 ~ 255 130 –
– 13 Fan D4 Max (
✽
) Fan D4 Driving Voltage Adj. at TPFN4 0 ~ 255 40 –
S 141 – Fan Output Level
– 0 Fan Output Level 0 : Max / 1 : Factory / 2 : Auto / 3 : Min 0 ~ 3 2 –
S 150 – Factory Set (Reset)
– 0 Factory Set Do not touched. Available at No.10 caution : Important! Do not attempt. 0 ~ 10 0 –
S 160 – Shootout
– 0 Switch 0 : Enable / 1 : Disable 0 / 1 0 –
S 180 – DDC Setting
– 0 HDCP EDID Data Setting 0 : EDID Data for DVI / 1 : EDID Data for HDCP 0 / 1 1 –
S 200 – CG Full Lamp ( Factory Use – PC Mode )
– 0 G-SIG Center (
✽
) DAC Video Center G 0 ~ 255 32 –
– 1 R-SIG Center (
✽
) DAC Video Center R 0 ~ 255 32 –
– 2 B-SIG Center (
✽
) DAC Video Center B 0 ~ 255 32 –
– 3 SDIA G DAC PSIGA 0 ~ 255 15 –
– 4 SDIB G DAC PSIGB 0 ~ 127 214 –
– 5 SDIA R DAC PSIGA 0 ~ 127 15 –
Group
No.
Data
Range
Initial Value
Function
Item
No.
Item
CAUTION :
These initial values are the reference data written from the CPU ROM to the memory IC when the new
memory IC replaced. The adjustment items indicated with “
✽
” are required to readjust following to the
“Electrical adjustments”. Other items should be used with the initial data value.
●
Service Adjustment Data Table