36
Computer Input
System SVGA 1
Input 1 RGB(PC analog)
Input 2 RGB
Input 3 Video
PC System Menu
PC System Menu
1
2
PC system can also be selected manually.
The PC System Menu
Selected system is
displayed.
Press the MENU button to display the On-Screen Menu. Use
the Point ▲▼ buttons to select
Input
and then press the Point
► or the SELECT button.
Use the Point ▲▼ buttons to select
System
and then press
the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select the desired system and
then press the SELECT button.
3
System RGB(Input 2)
Systems in this dialog box
can be selected.
Customized
Mode (1-10)
set in
the PC adjust Menu (pp.38-39).
This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a
computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper
image without any additional settings. (Signal formats provided in this projector are shown on pages 79-80)
One of the following messages may appear when:
When the projector cannot recognize the connected
signal conforming to the provided PC Systems,
Auto
is displayed on the System Menu box and the Auto PC
adjustment function works to display proper images.
If the image is not projected properly, a manual
adjustment is required (pp.38-39).
There is no signal input from the computer. Check the
connection between your computer and the projector.
(See “Troubleshooting” on pp.70-72.)
Auto
-----
The preset system is manually adjusted in the PC
adjust Menu. The adjusted data can be stored in
Mode
1-10
(pp.38-39).
Mode 1
PC Systems provided in this projector is chosen. The
projector chooses a proper system provided in the
projector and displays it.
SVGA 1
*
Mode 1
and
SVGA 1
are examples.
Computer System Selection
Automatic Multi-Scan System
Selecting Computer System Manually
