Eiki LC-XB24 Скачать руководство пользователя

Страница: 60 / 66

Appendix

Check the indicators for projector condition.

Indicators and Projector Condition

The projector is off. (The AC power cord is unplugged.)

The projector is preparing for stand-by or the projection

lamp is being cooled down. The projector cannot be

turned on until cooling is completed.

The temperature inside the projector is abnormally high.

The projector cannot be turned on. When the projector

is cooled down enough and the temperature returns

to normal, the POWER indicator lights red and the

projector can be turned on. (The WARNING indicator

keeps blinking.) Check and clean the air filters.

Projector Condition

The projector is ready to be turned on with the POWER

ON-OFF button.

POWER

red/green

Indicators

LAMP

REPLACE

yellow

WARNING

red

The projector detects an abnormal condition and cannot

be turned on. Unplug the AC power cord and plug it

again to turn on the projector. If the projector is turned

off again, disconnect the AC power cord and contact the

dealer or the service center for service and checkup.

Do not leave the projector on. It may cause an electric

shock or a fire hazard.

✽

The projector is operating normally.

The projector is in the Power management mode.

✽

The projector has been cooled down enough and the

temperature returns to normal. When turning on the

projector, the WARNING indicator stops blinking. Check

and clean the air filters.

• • • green

• • • red

• • • off

• • • blinks green

✽

When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.

When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the

lamp replacement counter after replacing the lamp. See pages 54 and 55.

• • • blinks red

Содержание LC-XB24



































































Результаты поиска

Содержание LC-XB24

Отзывы:

Похожие инструкции для LC-XB24

Бренды по названию

Популярные бренды

Eiki LC-XB24, Руководство пользователя

Результаты поиска

Содержание LC-XB24

Отзывы:

Похожие инструкции для LC-XB24

Бренды по названию

Популярные бренды